Refrigeration High Speed Aluminum Fin Press

Short Description:

Fully roiling structure and eight sides overlapping guideway ensure the stable operation of the system at high speed and long time.
Hydraulic overload automatic self-protection capability.
Hydraulic lifting function. Easy mould adjustment and cleaning.

Send email to us

Product Detail

Product Tags

Product Description

125 Ton Front Rear Two Connecting Rods High Speed Fin Press Machine
Electrical System
Type: Stand-Up Electrical Box, Movable Operation Panel
Power Voltage: AC380V, 50Hz, 3P
Operation Voltage: AC380V, 50Hz, 1P
Crossing Notch: Count Periodically, Air Cylinder Is Controlled By The Electrical Part
End Notch: Count Periodically, Air Cylinder Is Controlled By The Electrical Part
Middle Notch: Count Periodically, Air Cylinder Is Controlled By The Electrical Part
Sewing-Machining Cut: Count Periodically, Air Cylinder Is Controlled By The Electrical Part
Program Change System: Changeable For 2P To 1P,
Stow-Stopping Circuit: Count Periodically
Air Pressure Requested: 5Kg/Cm2(+10%)
Air Consumption: 1000l/Min
The Fin Press Will Stop Automatically Once There Is On Material, Alarm Of Collection And Insufficient Pressure Of Hydraulic System.
He Human/Machine Interface Will Show The Alarm Content

Picture Display

Refrigeration High Speed Aluminum Fin Press

Fin Press Specifications

Type: FKC-48A-125, four-uprights two-point, front rear side two connecting rods structure
Capacity: 1250KN
Strokes per Minute
Load speed: 150-250spm
No-load speed: 0-280spm
Stroke of Slide: 40mm
Die Height Adjustment: 50mm
Slide lifting Height (at min die. height): 100mm
Die Height: 270-320mm ( fulfill the die setting requirements )
Size of table: 1400x2000( fulfill the die setting requirements )
Bottom size of slide: 1350x1300mm
Feed exchange structure, Feeding Length: 0-120mm
With air Feeder
Fin Parameter: Φ9.52×25×21.65×48R×2P ( The buyer supply the drawing)
With scrap case
With oil –spraying unit

Fin sucked unit
Type: sucked automatically by vacuum air
Sucking length: 900mm（Guarantee）
Controlling type: the unit is driven by air cylinder, the sucking power is adjusted by the mean of a convertor
Sucking plate: Aluminum
Adjustment of sucking unit: The unit can be adjusted on up-down, left-right and front-rear directions

Collection unit
Type: 2 Position Shuttle unit
Collecting height: 720mm
Fin length: 100-900mm (the product for 4holes to 36holes, adjustable)
Fin Blow Down unit